[Low-smell Resin] Ultra-low-odor resin is made of plant materials, which is nearly odorless, and will not have a pungent odor when the bottle is opened and does not affect the indoor air.
[High Precision Details and Toughness] The 3D printed objects came out pretty hard with high accuracy and good detail. without excessive shrinkage. The printed artwork is stored for a long time without deformation.
[Wide Compatibility] Compatible for most wavelength 405nm LCD/DLP resin 3D printers, apply for dental design, Garage Kits, etc.
[Bright and Available Colors] 3D printer rapid resin is manufactured with high-quality pigments and photoinitiators, make the printed models show a bright and stunning color effect.
[Safe and Reliable] The resin passed MSDS certification. A leak-proof bottle and completely wrapped in a bubble bag, make the photopolymer resin intact during transportation.
Solidify Wavelength: 405nm
Bending Modulus: 1.882-2.385 Gpa
Bending Strength: 59-70 MPa
Hot Deformation Temperature: 80 ℃(176°F)
Volume Shrinkage: 3.72-4.24%
Tensile Strength: 36-52 MPa
Tensile Modulus: 1.779-2.385 GPa
Elongation at Break: 11% -20%
Shore Hardness: 84D
Glass Transition Temperature: 100 ℃(212°F)
Density: 1.05-1.25 g/cm³
Notched Izod Impact Strength:44-49 j/m
Shelf Life: 1 year
Bottom exposure time(s): 30-60 s/layer
Normal exposure time: 6-10 s/layer
Shake the bottle before pouring the resin into the tank.
Wear gloves and masks before using them to avoid direct skin contact.
Avoid printing too many items at the same time. Divide your production into several stages to achieve better results.
Clean finished models with IPA or Ethanol. Dip in alcohol bath and/or clean with soft brush remaining resin on the model.
Recommended storage temperature 20°C - 30°C.
To preserve the resin's characteristics, filter the liquid after each printing process and protect the containers from direct sunlight.