hi I put it together and printed out and item and the printer hot bed would turn off to zero so I found a setting to turn off eco mode and the print came out good like my kobra max but the anycubic kobra max was very simple to put together and use. the printer could be better get rid of the eco mode and put in a better motherboard and the printer would be nice like the kobra max. I do like the printer but it needs a some upgrades.

Great printer. Smooth quality prints can be achieved in no time and the filament change feature is great

Easy to find what your looking for

It works well and is exactly what I ordered, creality.shop is not a scam like other people say.

Fast shipping and really fast customer service responses to email. Thanks

Easy to build, the set up can be tricky, but I took it slow and everything works perfectly. I ended up replacing the plastic feed assembly with the metal upgrade and the bed springs with silicone bushings.

Excellent printer and good for those new to 3dPrinting. I have moved to my own designs and prints for useful things around the home within days. Advice to new users, throw away the free PLA - it knots and causes failed prints. Only issue is a faulty USB port (cable falls out it is so loose and waiting on repair/replacement) but useable through memory card

It work, but change file names after Slicing or the printer won't pick it up

Works perfectly so far... Have done a couple of 32 hour prints and still works great

I must admit I was slightly skeptical after reading some reddit posts but it came in tact and ready to go. My first prints came out perfectly and I had to do some more fine tuning when I switched filament but this thing is a powerhouse for the price

I played around with the ender5plus for some weeks now. The packaging is awesome, no damage inside (box was little beat up by transport company i guess) The assembly was a breeze. Instruction is pretty decent and you cant mess up basically. Now for the printing, i used up sample pla, half of pla+ and petg from sunlu rolls. The Petg was a nightmare at beginning, but i managed to get it dialed in. After that setting for pla+ was like a joke, easy. I can say its a very good base for beginner with no experience with 3d printers ( im new to it so i can say) The only problem i had was wierd bug when the nozzle decided to ram the glass, scratching it up a bit. If you work with the printer and accidently bump the moving assembly, and then start a print and the printer is acting not like it usually does (doesnt go to the center, skips the end stop for some reason) just restart it and its fine. Overall im pleased, would give it 9 out of 10 for some minor flaws that can be fixed with the printed itself! Would recommend to anyone!

Fantastic build quality, easy setup, excellent results on the Ender 5 Plus.

The frame is well built and the instructions are clear. So far it’s really a nice printer.

Amazing product, easy to set up. Print right away and have fun

Its has the Updated Mean well RSP-500-24 AC/DC power supply installed.

Excellent!

This printer is absolutely amazing! Setup took less than an hour, and this is my first printer. The design and manufacturing tolerances are EXCELLENT. All the pieces fit perfectly into place. The English version of the manual is pretty good. Before purchasing, I watched and read A LOT of reviews. Many of the negatives listed in the reviews include bed leveling issues, excessive noise, and hours of tweaking to get the printer to operate well... I experienced NONE of these issues. I actually can't believe people complain about this printer being "too loud." For my first print, I did the little owl sculpture that is included on the MSD card. I left all settings in Cura stock and just clicked print. The print quality far surpassed all of my expectations.

Printer works great!!! I would recommend.

The Ender 5 Plus is a good looking solid machine with a huge build table. In my experience, the BLTouch makes it more difficult to get the bed level because each time it is needed, it takes a long time to take measurements. Manual adjusting isn't too difficult and the machine has firmware for setting-up as opposed to the Ender 3 Pro that requires a separate print job downloadable from thingiverse to manually level using having machine move to each corner. With that said, I only use this machine for big, several hour prints.

My first printer, many moons ago, was an original RepRap Mendel. While great to learn the basics via the struggle of use, prints were mediocre at best. Fast forward 3 printers to my first Creality machine, the Ender 5 Plus. WOW What a difference!! The 5 Plus is well engineered and robust. My wife works for a engineering firm that utilizes a printer far more expensive then the 5 Plus, they are impressed with MY print quality!! I could not recommend any other machine at this point. The Ender/CR series machines are fantastic for people of all skill sets, from rank amateurs to seasoned owners.

This printer has been absolutely amazing! It has blown me away! I love the quality, the print size and speed! There are a few mods that I will be doing but the stock printer has been printing perfect for me thus far.

This is an amazing printer, I really really enjoy the Ender 5 Plus, it prints smooth, it is large, the only thing I had a problem with is the nozzle, it was cross threaded into the machine, it still worked however I will need a new heater block, but that is all!

Setup was a breeze, but the guy putting the printer together and boxing it must have been late for lunch because I found the screws, washers and bolts for the Z axis bar thrown loosely into the box. I could not find one screw. The instructions are incomplete and the wires coming from the extruder are not labeled so you kind of have to guess. I guessed badly and had the hot end and bed heating wires reversed. Printed great thou! I have printed 3 full bed prints already and they are all perfect! It’s a great printer so far!

Very happy with the printer. It has not had any issues after almost constant printing for a month.

I received my Ender 5 Plus, a lot faster than I thought. Setup was super easy! Except there were 5 loose screws, 6 loose nuts and 6 loose washers thrown into the box. Turns out they belonged to the Z axis to hold the plate rail onto the middle shaft. I guess whoever boxed the printer was late for lunch and just threw them into the box. The other Z axis screws were super loose. Other than that it's a great printer far! I will start my first print tonight and update this. - Keith Stenman Florida USA

I watched my son put the printer together with ease. Within 2 hours we were printing quality parts.

Very happy with the printer. Third print since set up trying to test its limitations and very satisfied. Looking forward to trying out some more changing materials once the enclosure is complete. Only suggestion...although the mechanical assembly was easy and straight forward there was challenges attempting to upgrade firmware downloading .rar files? And needing to convert?? Still unsure if I did that correctly. Hoping there is a way to dumb it down a bit for some of us. Otherwise extremely happy with the machine. Thank You!! Mark