Ezra B.
I had a bad experience prior to my order I chose a Anycubic mega s and they never texted me to say they were discontinued so I didn’t receive a product or money for months I ordered my printer sunday got it Friday prints started and done by 3 hours after getting it all i can say is creakily is amazing please please read reviews and believe them you won’t get lucky with cheap stuff…..if you even get it. Thanks creakity.
Joe v.
From a newbies point of view, my new Ender 3 is completely amazing! Easy to set up and get going. I was out of the box and printing in just about an hour or so. Very well done! I see many more in my future!
Joey P.
This thing is amazing! For ~$200 you can’t ask for anything better the print quality is superb and assembly is easy if you follow the instructions. I wouldn’t recommend the pro version because with a few simple add one to this one you can get a way better printer than it already is
Pedro A.
With this is the sixth printer, I can say that it is the one that offered the best quality on the first impression. Fantastic and with a lot of quality. Without doubt the one that offers the best value for money. Thank you Creality.
Pedro
(Porto, Portugal)
MacLean M.
I bought a None Creality Ender 3. It was a Piece of garbage. I had to send it back to Amazon and get my money back. I got a REAL Creality Ender 3 and have had it for a week. I am seriously impressed at the QUALITY of Workmanship built into this machine. I had a Creality Ender three for OVER 8 months and gave it to a friend to up grade to a Ender 3 pro. It was that Piece of garbage I mentioned. BUT...the ORIGINAL Creality Ender 3 had NO wabble in the bed at all. It created prints that are great. I will never buy any 3d printer that does not have the Creality Name on it.
JIm H.
The machine itself is phenomenal. However mine arrived with a defective heat bed. Repeated calls and emails to the company resulted in delay after delay. I finally filed a dispute with pay pal. That got some attention but now I was told that it would be several weeks before the item could be shipped to me to repair this. I don't want to return this printer as I have invested a great deal of time tuning it and adding accessories to make it even more impressive. Understand that this machine is easily rivaling machines costing thousands of dollars more. Taking your time to assemble it properly double checking your work and following many of the advices that can be found online you will have a printer that will deliver performance that will far exceed the cost of this machine. The only thing I wish would be that customer service and adressing defective parts complaints would be handled more swiftly. Any machine can have damage on arrival, it is how the company adresses such issues that sets it apart. While the people at Creality are very polite they are also extremely slow.
Matthew B.
This is my first 3D Printer and I really like it. I read so many reviews (Amazon) and watched so many videos (YouTube) before I purchased this printer. I also found that Amazon didn't have the best deal on the printer and purchased it straight from Creality.
I am having a blast with the printer but I didn't give it a 5 star rating only because I've already printed some upgrades and also purchased new bed springs for the printer. I think it's really cool that it's easy to upgrade, but I wonder if the upgrades could have been included in the kit from the manufacturer.
It's not a huge deal, but that's the only reason i did not give this printer a 5 out of 5 rating. Everything else concerning the fun I'm having with this printer is just amazing. I will consider another printer from this company when I decided to purchase my next printer years from now.
Deniz Y.
Great value. Went together and we were off and printing away. Watch the setup vids makes the adjustments a snap.
Matt J.
Printer came partially assembled and with the help of the included instructions and YouTube videos I was able to get this built and tuned in about an hour. First calibration print went as expected, but some minor adjustments got the benchy to print with decent detail. I think I'm under extruding now, but that's easily fixed too. Overall an awesome printer for the price and super fun to work with.
Eric B.
Had a $1000 printer from 5 years ago (powerspec). Always finicky, required constant supervision. This printer just works flawlessly. Love my Ender 3
Edward D.
I am so glad I bought the Ender 3 pro printer. My XYZ da Vinci died and this was to be a quick replacement while waiting to be repaired but MAN!!! The quality of my prints on the ender 3 put the da Vinci to shame. EXCELLENT product!!!
TIMOTHY S.
Put it together following one of the many youtube videos,, and it just works great!
Priyank S.
First print was okay and then now when I am trying to print again then the pla material is not sticking the build plate properly so is there a way to solve my problem.
Chris A.
Very easy to set up, even easier to use. To dates my larger prints have taken anything from 5 to 11 hours (3D printing is not a means of instant gratification), but apart from glitch in first print where I knocked all-but-completed dog (meaning my first model dog has a hole in its head), printing has been very smooth and detail has been exceptional. I love it!
Martin S.
I love this printer! Works like a charm, definetly buying more from you, next up is the CR 10 and later on the 10 - 5s
Teady C.
I am so delighted I purchased the Creality Ender 3 Pro Printer
This is my first time ever to use or to own one and just still can't
believe I am Printing from this I have to start learning how to make
my own Parts I need to be done by the Ender 3 Pro this just one
amazing 3 D Printer my very First Print was the Dog was on the
Memory Card that came with the Ender 3 Pro and I am trying to
believe I am using and Printed from the Ender 3 Pro the D Best
3 D Pro Printer on the Market, I am just hooked and want to Learn
a lot more in how to make my own Pieces and thanks again to Creality
for this Amazing I am just in another world and what this Ender 3 Pro can do
This is the Best Deal for the Money the hours I am going to get out off all this.
William P.
Easy build , went together well and works like a charm. Very happy with my purchase. Will see how long before I want to upgrade .
Alo A.
The only problem I have with it is that it comes with no fliment
Teo L.
It is great love it i never thought that this thing would work this well. It is not worth the $40 to get the magnetic bed on the pro. I have printed a few quick mods witch greatly improves the performance. It is quiet enough that from the room next door With the door closed I cannot hear it. I recommend buying $6 razors to scrape off prints. so far i have no issues with the printer. Great buy!
Desiree L.
My husband loves it better than the first I bought him. Thank you
Great communication and customer service.
Caden S.
Easy to get ready me and my dad set it up in under an hour the bed is annoying to level I didn??t know what auto level was until I used it so for a while I manually set x y z
Fred S.
Santa gave me a wonderful Christmas gift. This thing is amazing! After setup, made the "test dog" and followed that with a self-designed gear I need for my woodworking shop. It did a tremendous job! Takes but a few minutes to level the table and then away it goes. Creality did a wonderful job in making 3D Printing affordable to the hobbyist. Great job, Creality!
Jackie
low price, solid structure, less noise, good packaging, delivery in time, comes with needed tools. overall great in that price range
Doug
Really good and cheap printer, you have to have technical understanding to build it together. After doing some hardware updates Would recommend him and always buy again if needed.
Ian C.
This was my first excursion into 3D printing and I chose the Ender 3 because, after watching a lot of reviews on YouTube, it seemed to be the best starting printer at an affordable price.
When the printer arrived it took me just over an hour to assemble it. It then took me over 2 hours to level the bed (Creality; please add an auto bed levelling upgrade) before starting my very first print.
6 hours later the little dog test print was completed and looked fantastic.
The Ender 3 is a perfect first 3D printer. I am a retired computer software engineer with a modest amount of electrical engineering know how, and yet I was able to assemble, set up and produce an excellent first print after about 3 hours total work. The supplied filament was totally inadequate, but I knew this and had already pre-purchased a roll of PLA.
I would not hesitate in recommending The Creality Ender 3 to anybody starting in this fascinating hobby.
Quin D.
This is definitely the best printer at this price point. It prints beautifully, was easy to assemble and maintain, and is easy to operate. I am quite pleased with the quality of this 3D printer. I would recommend it to anybody looking for a low-cost reliable 3D printer.
Oleg Korotchenko
Nice printer! BUT manual is a bit weak - needed youtube.
Not much filament included (can??t print the test model even)
Vladimir Jelev
Printer received as expected. Great packaging.. all parts in great working order. Was very impressed with placing the leadscrew in the extrusion.. All and all great product..
martin
If you are searching for a portable, safe and reliable 3D printer, Ender is your buy.Still, I will be taking about all the pros and cons so that you can make your choice correctly.
Juan Pablo Parra
Great packaging, very fast shipping, great build quality
Assembly instructions are easy to follow
Good quality prints
Good adhesion
Anthony
A very compact 3D printer, solid 3D printer, accurate enough which is perfect for your hobby. The construction is not difficult, but it takes several hours to screw everything together perfectly.
Artgen
The DIY build was easy. "Debugging" was pretty easy. Its a quick matter to level the bed. Especially if you use a playing card. They say A4 paper, and that probably works well, but so far, I haven't been disappointed. The product is great quality for the money. The print quality on this thing is AMAZING for the price. I can't wait to print more stuff with this thing. Really great desktop 3d printer. now that it is operational... guess what I'm printing!
George
Easy installation, the price is really very good!
Height and good quality
Diego Alonso
First 3d printer
Fairly easy to build with some Youtube guidance.
Sturdy design.
Nice printing quality without much adjustment.
Cheap entry into 3d printing.
Gareth Thomas
It was easy to build in about 1,5 hours and for the money I don't think you can buy a better put together machine.
Power loss recovery is a very nice feature.
Sturdy frame and all the parts go together nicely.
Cables are well marked.
The machine lives up to it reputation.
chillinglu
For everything to line up perfectly I had to assemble some pieces a few times and visualize some videos.
Matthieu
Ender 3- My First 3D printer
For the first 3D printer, it was easy to assemble and didactic at the same time.
I like the build quality, the print quality is good, but of course it depends a lot on the choice of the correct parameters.
Do not forget to buy a filament roll before you start printing, what comes is very little.
Meets my expectations, without a doubt I recommend!
Mark
excellent, great printer, great price!
Easy assembly guaranteed, in less than an hour I built it with my 6 year old son.
Extremely fun to ride it.
All screws and other components are correctly labeled.
As far as the calibration is concerned, the extruder is correctly calibrated while I have slightly intervened on the steps of the X and Z motors.
So in less than 3 hours I had the printer mounted and calibrated both hardware and slicer (simplify 3D).
I highly recommend it as the first 3D printer for both ease of assembly and robustness.