Creality3D CR Touch Auto Bed Leveling Sensor for Ender-3/Ender-3 pro/Ender-3 V2/Ender-3 MAX/Ender-5/Ender-5 pro/CR-10 with 4.2.2/4.2.7 motherboard
Creality 3D
Regular price
$49.99
Sale
View More
- Ender Serie: Ender-3/Ender-3 pro/Ender-3 V2/Ender-3 MAX/Ender-5/Ender-5 pro
- CR Serie: CR-10
- Only applies to 3D printers with a 32-bit 4.2.2/4.2.7 motherboard.
CR Touch is a Creality 3D research institute self-developed 3D printer platform leveling solution based on hundreds of millions of users' data used by the creators.
Compared with the traditional automatic leveling, it is compatible with more 3D printer platforms, more stable, and cost-effective.
CR Touch is upgraded to a metal probe, which reduces wear and tear and greatly prolongs its service life.
Download the CR Touch program from the Support Center and copy it to the TF/SD card. Insert it directly into the card slot of the 3D printer. The program can be updated after power on.
Feature
David M.
Installing the CRTouch was a breeze, and printing (without manual leveling) is a joy. I'm using Jyers firmware w/UBL on my 3v2. I have it setup to do a 4 point test for 'tilt' with each print. After getting the Z level set correctly (disconnect and remove the Z-limit switch), I've done probably 10 prints without touching the wheels, and all are spot on, even with the removable/flexible PEI bed I'm using (I had some filament that was giving me a hard time, that's what led to the PEI, but it's so easy getting stuff off after). Before the CRTouch, I'd have to level after every print, and didn't always get it right. I've only made a few of upgrades to my 3v2 (PEI, yellow springs, CRTouch), and the CRTouch is the one I'd recommend the most.
Mark G.
Finally! A bed leveling system that looks and acts like a high line professional! I go a little overboard with all of my printers. I print new machine part, I machine new printer parts. And then ill strip down and even paint them or my latest serakote the entire machine! With the CR I have printed a Satsana Remix that the cr touch actually sinks into and is right beside the hotend! Now the extruder the entire piece looks a Ferrari 612 Superfast... She work's Perfecto!
Doug H.
The CR-Touch matches perfectly with my Ender3 v2. I was happy that a metal probe is used making it a more robust device. Less chance of breakage. The single cable connection makes it a breeze to install. Thank you Creality.
Taylor H.
It was easy to install, and seems to work well. I did have to upgrade the stock motherboard on my CR10 to a 32 bit V4.2.7. I haven’t noticed a drastic improvement in print quality because I would always level my bed before every print. However, since installing the CR Touch, I only level my bed every 3 to 5 prints.
Tim W.
The CR Touch is awesome. Bed leveling has never been easier. I highly suggest getting this for your Ender or CR series printers. Having three myself, I am going to be purchasing two additional units for the other two. The CR 10 is nice and level, and all the prints are coming out perfect. This is a must have for anyone who has a printer that needs help leveling the machine.
Janis L.
Really plug-and-play setup.
The box contains adapters for all Ender models, choose the one you need. Only 4 bolts. Then plug one side of the wire into the probe, the other into the motherboard.
Download the latest firmware and flash it.
Once that's done, a new icon will appear on the screen for bed leveling.
Very easy and quick to set up.
Eduards F.
Item arrived relatively fast. I installed it in the same evening. There were no problems with Ender 3 (32 bit board) and firmware is easy to flash. There were some minor issues with mounting bracket to get CR Touch stay in level but small paper pieces helped to solve the problem and bed levelling went well and now first test print is printing. Looks that overall performance has been improved and layers are much more accurate than before. Will do further tests but couple of hours spent on this upgrade worth it.
Thank You!
Russell L.
I recently received a Creality CR Touch for completing and survey and wasn't disappointed. I replaced my BLTouch of 8-months with the CR Touch with no issues on my Ender-3 v2.
I really like the steel pin instead of the BL's plastic one and the black body with a faint glow. It's been very consistent over the past two weeks of use and I would recommend it to anyone looking to upgrade their Ender-3 v2 to ABL.
Kelson K.
I love how great my prints come out and how accurate the CR touch is!
Douglas H.
The Creality probe looks very well made and comes with mounting hardware to fit several models of 3D printers. I like that it has a metal probe. It’s more durable than a plastic probe on the BLTouch that’s installed now.
Jeremy A.
Easy to install replaced my BLtouch. Looks great and just feels like it is better built and more thought out.
Beomseok K.
It works very well. Thanks for the gift!
Greg C.
I had trouble with the BL-Touch because it would fail half the time when leveling. The CR-Touch has a much sturdier design with a metal prod instead of plastic. Now I can confidently add the level command before all my prints and know that it will work.
Jesus R.
I've been using it for the last 11 days. It's working great. I have no problems with my first layer print. It was very easy to set up. I would recommend it for everybody that has Ender 3 V2 to get one.
Josiah K.
This thing works exactly as advertised!
will b.
being only the second bed leveler I installed, the first being a bl touch on an ender3 as the wife unit decided she wanted to print pretty things and was not amused with my dial indicator/runout gauge as she did not understand it. that went pretty easy, and she was super happy, but now my ender always has some decor thing for a wreath or knickknack on it. I decided to step myself up to a cr10 and add a CR touch, man I love the whole thing once my cr10 was setup, tuned and this thing installed, it has been a set it and forget workhorse. Follow the instructions, all the steps, dont forget the offset. OH BEST PART, metal, not plastic probe.
István B.
In spite of your advertising if was not sent from CZ but from China, so I had to pay the tax and custom costs.
Randolph R.
Pretty easy to install. I would follow a youtube video but overall it was easy. Once I got it going, every print was looking pretty good. I'm happy with the results.
Shawn P.
So far so good awesome little bed leveling device and i would recommend this product
Sammy P.
It’s awesome! Really helps!
Talhah W.
Thing works great! Way better than BL touch!
Kathleen F.
The product arrived in a nice small box with everything needed for any Creality printer including 3 different metal brackets to match your machine. I installed mine on an Ender 3 Max. I have a BL Touch on my Ender 3v2 so I can compare them. I love the look of the new CR Touch. All you see it the black exterior and through vents in the top you can see both a red and blue led light. It just looks like a more robust product than the BL Touch which is forever in your face with this bright red light. The black color of the CR Touch is understated and matches the machine perfectly. I used the Creality firmware for the Max for BL Touch and it worked perfectly with no adjustments needed. Just add the M29 code in Cura for your machine and it will start the bed leveling process with each print. I have been using it now for a few weeks and it works well every time. I have no issues with it. Just be sure the first time you use it to set the z-offset and save it. I ended up at -1.55. Now it works perfectly every time and I have not had to make any adjustments since.
heather n.
Easy to install and works great!
William W.
The Btouch just arrived and I opened the box to find an apparently well made device. When I have time to install it, I look forward to using it.
Jason H.
Setup was a breeze. Opened up the case, plugged in a new cable, routed the cable to the print head, reinstalled the case bottom, installed the probe/mount, downloaded and flashed new firmware, off and on: that’s it. Manually leveled the bed height to the rails using a caliper, used a small ruler to adjust the x-rail to the just leveled bed, set the new Z height, ran the new auto level using the probe, ran a test cube and voila, a perfectly adhered and level print. Love the black casing too. Sure beats that red glow of a certain competitor.
Yurtkan Y.
If you want to use with creality printer its so easy and efficient. Its very precise.
David M.
Installing the CRTouch was a breeze, and printing (without manual leveling) is a joy. I'm using Jyers firmware w/UBL on my 3v2. I have it setup to do a 4 point test for 'tilt' with each print. After getting the Z level set correctly (disconnect and remove the Z-limit switch), I've done probably 10 prints without touching the wheels, and all are spot on, even with the removable/flexible PEI bed I'm using (I had some filament that was giving me a hard time, that's what led to the PEI, but it's so easy getting stuff off after). Before the CRTouch, I'd have to level after every print, and didn't always get it right. I've only made a few of upgrades to my 3v2 (PEI, yellow springs, CRTouch), and the CRTouch is the one I'd recommend the most.
Mark G.
Finally! A bed leveling system that looks and acts like a high line professional! I go a little overboard with all of my printers. I print new machine part, I machine new printer parts. And then ill strip down and even paint them or my latest serakote the entire machine! With the CR I have printed a Satsana Remix that the cr touch actually sinks into and is right beside the hotend! Now the extruder the entire piece looks a Ferrari 612 Superfast... She work's Perfecto!
Doug H.
The CR-Touch matches perfectly with my Ender3 v2. I was happy that a metal probe is used making it a more robust device. Less chance of breakage. The single cable connection makes it a breeze to install. Thank you Creality.
Taylor H.
It was easy to install, and seems to work well. I did have to upgrade the stock motherboard on my CR10 to a 32 bit V4.2.7. I haven’t noticed a drastic improvement in print quality because I would always level my bed before every print. However, since installing the CR Touch, I only level my bed every 3 to 5 prints.
Tim W.
The CR Touch is awesome. Bed leveling has never been easier. I highly suggest getting this for your Ender or CR series printers. Having three myself, I am going to be purchasing two additional units for the other two. The CR 10 is nice and level, and all the prints are coming out perfect. This is a must have for anyone who has a printer that needs help leveling the machine.
Janis L.
Really plug-and-play setup.
The box contains adapters for all Ender models, choose the one you need. Only 4 bolts. Then plug one side of the wire into the probe, the other into the motherboard.
Download the latest firmware and flash it.
Once that's done, a new icon will appear on the screen for bed leveling.
Very easy and quick to set up.
Eduards F.
Item arrived relatively fast. I installed it in the same evening. There were no problems with Ender 3 (32 bit board) and firmware is easy to flash. There were some minor issues with mounting bracket to get CR Touch stay in level but small paper pieces helped to solve the problem and bed levelling went well and now first test print is printing. Looks that overall performance has been improved and layers are much more accurate than before. Will do further tests but couple of hours spent on this upgrade worth it.
Thank You!
Russell L.
I recently received a Creality CR Touch for completing and survey and wasn't disappointed. I replaced my BLTouch of 8-months with the CR Touch with no issues on my Ender-3 v2.
I really like the steel pin instead of the BL's plastic one and the black body with a faint glow. It's been very consistent over the past two weeks of use and I would recommend it to anyone looking to upgrade their Ender-3 v2 to ABL.
Kelson K.
I love how great my prints come out and how accurate the CR touch is!
Douglas H.
The Creality probe looks very well made and comes with mounting hardware to fit several models of 3D printers. I like that it has a metal probe. It’s more durable than a plastic probe on the BLTouch that’s installed now.
Jeremy A.
Easy to install replaced my BLtouch. Looks great and just feels like it is better built and more thought out.
Beomseok K.
It works very well. Thanks for the gift!
Greg C.
I had trouble with the BL-Touch because it would fail half the time when leveling. The CR-Touch has a much sturdier design with a metal prod instead of plastic. Now I can confidently add the level command before all my prints and know that it will work.
Jesus R.
I've been using it for the last 11 days. It's working great. I have no problems with my first layer print. It was very easy to set up. I would recommend it for everybody that has Ender 3 V2 to get one.
Josiah K.
This thing works exactly as advertised!
will b.
being only the second bed leveler I installed, the first being a bl touch on an ender3 as the wife unit decided she wanted to print pretty things and was not amused with my dial indicator/runout gauge as she did not understand it. that went pretty easy, and she was super happy, but now my ender always has some decor thing for a wreath or knickknack on it. I decided to step myself up to a cr10 and add a CR touch, man I love the whole thing once my cr10 was setup, tuned and this thing installed, it has been a set it and forget workhorse. Follow the instructions, all the steps, dont forget the offset. OH BEST PART, metal, not plastic probe.
István B.
In spite of your advertising if was not sent from CZ but from China, so I had to pay the tax and custom costs.
Randolph R.
Pretty easy to install. I would follow a youtube video but overall it was easy. Once I got it going, every print was looking pretty good. I'm happy with the results.
Shawn P.
So far so good awesome little bed leveling device and i would recommend this product
Sammy P.
It’s awesome! Really helps!
Talhah W.
Thing works great! Way better than BL touch!
Kathleen F.
The product arrived in a nice small box with everything needed for any Creality printer including 3 different metal brackets to match your machine. I installed mine on an Ender 3 Max. I have a BL Touch on my Ender 3v2 so I can compare them. I love the look of the new CR Touch. All you see it the black exterior and through vents in the top you can see both a red and blue led light. It just looks like a more robust product than the BL Touch which is forever in your face with this bright red light. The black color of the CR Touch is understated and matches the machine perfectly. I used the Creality firmware for the Max for BL Touch and it worked perfectly with no adjustments needed. Just add the M29 code in Cura for your machine and it will start the bed leveling process with each print. I have been using it now for a few weeks and it works well every time. I have no issues with it. Just be sure the first time you use it to set the z-offset and save it. I ended up at -1.55. Now it works perfectly every time and I have not had to make any adjustments since.
heather n.
Easy to install and works great!
William W.
The Btouch just arrived and I opened the box to find an apparently well made device. When I have time to install it, I look forward to using it.
Jason H.
Setup was a breeze. Opened up the case, plugged in a new cable, routed the cable to the print head, reinstalled the case bottom, installed the probe/mount, downloaded and flashed new firmware, off and on: that’s it. Manually leveled the bed height to the rails using a caliper, used a small ruler to adjust the x-rail to the just leveled bed, set the new Z height, ran the new auto level using the probe, ran a test cube and voila, a perfectly adhered and level print. Love the black casing too. Sure beats that red glow of a certain competitor.
Yurtkan Y.
If you want to use with creality printer its so easy and efficient. Its very precise.